- This event has passed.
2018 welding standards update – Hamilton
March 28, 2018 @ 12:45 pm - 4:30 pm
Why attend?
Recent developments in key structural steel standards have meant significant changes to welding related requirements that you need to understand.
This seminar will explain these changes to ensure you’re efficiently meeting the current requirements of these standards including technical and quality management aspects.
Who should attend?
This seminar is ideal for those who deal with welding related works within their organisation including fabricators, welding supervisors & inspectors, training providers and those implementing and managing quality systems.
AS/NZS 5131
- Replacement of NZS 3404.1 as the cited standard for the fabrication and erection of structural steelwork
- Accepted as the standard defining good practice in welded fabrication
- Now the basis for the Steel Fabrication Certification Scheme (SFC)
AS/NZS 1554.1
- Revision of compliance issues
AS/NZS 2980
- Welding qualification standard now revised to be based on ISO 9606.1
ISO 9606.1:2012
- Now adopted as AS/NZS ISO 9606.1:2017
Duration
- Half day
- 1245pm to 430pm
Program
- Registration
- Session 1 – AS/NZS ISO 9606.1
- Session 2 – AS/NZS 2980:2018
- Tea / coffee break
- Session 3 – AS/NZS 1554.1 recent amendments, welding procedures and non-prequalified steel
- Session 4 – AS/NZS 5131 welding reuqirements
- Summary
Michail Karpenko | General Manager Welding Centre
I’m an international welding engineer and member of Standards New Zealand and Australia committees including WD-003 “Welding.” This ensures I’m actively involved in the revision and updating of welding standards such as AS/NZS 1554, AS/NZS ISO 3834, DR ISO 17607 and AS/NZS 5131. I was also instrumental in establishing the Steel Fabrication Certification Scheme (SFC) in collaboration with SCNZ
Alan McClintock | Senior Welding Engineer
I’m a qualified welder, welding supervisor and inspector, and an IIW welding technologist. I’ve got considerable experience with New Zealand and Australia welding related structural standards and related quality control procedures, and I’m a Lead Auditor for both ISO 3834 and the Steel Fabrication Certification Scheme (SFC).
$138
$184
$248
HERA Ordinary & Affiliate members
HERA Associate, SCNZ, NZSSDA & Engineering NZ members
Non members
* Fee’s include tea & coffee and seminar notes
Address
Distinction Hamilton Hotel & Conference Centre
100 Garnett Avenue, Te Rapa
Hamilton 3241
Not based in Hamilton?
Click on our other locations below to register there instead.
Auckland – 27 March
Christchurch – 4 April
Queenstown – 5 April
New Plymouth – 11 April
Palmerston North – 12 April
Bookings
Simply fill out this form to register, and from here we’ll take care of the rest!
Flights & accommodation
If you’ll be travelling to attend this seminar – accommodation and travel are your responsibility to organise. We’d like to advise you not to book these until you’ve received a confirmation email that the seminar is going ahead.
Im sorry registration for this course has now closed.
We suggest you search our events section online to see if were holding this particular course in another location that would suit you. Alternatively, we can place you on a waitlist for the next available course.
To do so, please send an email to admin@hera.org.nz with subject title: Course waitlist request. Please include your full name, company, contact phone number, course and location youre interested in within the email.
